Showing posts with label cabinets. Show all posts
Showing posts with label cabinets. Show all posts

Thursday, March 21, 2013

Cabinet Trends for 2013

This year, during the International Builder's Show in Las Vegas, the hottest trends for kitchen cabinets were announced...and let me tell you, gone are the days of ho-hum cabinetry! With so many custom options and configurations available in today's market, kitchen designs are more elaborate and connected to the overall flow of the home. Open floor plans are now placing kitchens, which used to be located away from the main part of the home, at the forefront--forcing homeowners to outfit them in a manner fitting of their new importance in the home. Below is a run down of trends to watch for in kitchen cabinetry this year...

Colors: 
  • Darker, furniture-like finishes
  • Pure White
  • Avoid middle finishes, such as natural oak
European Style Cabinets: 
  • Hidden hinges
  • Soft close doors and drawers
  • Frameless cabinet construction
  • Full overlay doors and drawer fronts
Cabinets with glass doors:
  • Allow homeowners to showcase fine china and stemware
  • Help keep a kitchen organized by helping occupants to see what is being stored in each cabinet
Popular Styles: 
  • French Country: rich in personality and warmth
    French Kitchen Décor, Taste of Elegance : French Country Kitchen Decorating
  • Contemporary: mostly available in white, chrome, and bold colors, these cabinets are classical with a touch of modern.

  • Shaker Style: simple, clean lines that work well with numerous types of decor
sources: one . two . three . four

Friday, October 19, 2012

Check it out!

Phil Bowers, VP of Business Development at ACS, was recently featured on the Woodworking Network's blog with a great article on embracing technology within the casework manufacturing industry.

Be sure to check it out here!

Saturday, October 13, 2012

Cabinet Core Materials

As a designer at a fixture company, I should have some understanding of what goes in to making a cabinet--you start with some type of middle material and put a laminate on it, right? Well, yes, but while I never knew the specifics, I had a feeling there is actually a little more to it. So when my boss approached me about putting together a list of cabinet core materials, I thought, "Simple! Two, three choices max?" Wrong! There are so many to chose from, and each option has its pros and cons. Pick the right one and you have a sturdy, well made cabinet that will stand the test of time. Pick the wrong one and you may be replacing your cabinets a little more often than you had anticipated!

While you might not get the opportunity to put this information to use on a regular basis, if you play any type of role in specifying, purchasing, or installing cabinetry it is helpful to have a basic understanding of how the product is constructed.

Read on for a run-down of core materials...

1. Plywood
  •  Strong
  • Doesn't pose the cracking, warping or shrinking threat of solid wood
  • Can be manufactured in very large sheets
  • Two types:
    • Hardwood Plywood
      • Generally higher quality
      • Emits gas and formaldehyde from adhesive used in construction
    • Softwood Plywood
2. Combination Core
  •  Consistent flatness
  • Good screw-hold ability
  • Lighter than MDF or particleboard core
3. Lumber Core
  • Good bending strength
  • Good screw-hold ability
  • Excellent matching properties
  • Edges can be shaped and matched to finished surfaces without filing
  • Good bounce back, making it a great choice for long or wide shelves in cabinets and closets
  • Good choice when routed edge treatments are necessary and the edges cannot be concealed
    CONS
  • This is the most expensive core to manufacture, meaning finding a supplier may be difficult
  • Only the highest grade lumber core should be considered as there is a severe drop off in the consistency in lesser grades
  • Most grades machine poorly
  • Substantial voids are often present
4. MDF
  • Very smooth surface
  • Strong
  • Not prone to warping
  • Typically consistent from batch to batch
  • Typically free of voids and blisters, which results in better veneer consistency and bond, leading to less chipping during crosscut operation
  • Easy to machine and cut edges are excellent for glue adhesion
  • Good for use in humid climates or rooms
  • Great screw-hold ability when used with MDF-specific screws
  • Less expensive than plywood
    CONS
  • Extremely sensitive to heat and may experience bubbling, blistering, discoloration and peeling as the surface becomes damaged
  • MDF cabinets usually can't be repaired and generally need replaced more often.
  • More expensive than particleboard
  • More dense than particle board or plywood
  • Subject to water damage unless properly sealed with melamine, laminate, or other similar water resistant material.
5. Particleboard
  • Least expensive of all core types
  • Lighter than MDF
  • Great use of a waste product that would otherwise be discarded
  • More economical than plywood
  • Its uniform thickness, smoothness, surface integrity, ease of layup, and ability to stay flat make it an ideal core material
    CONS
  • Heavier than plywood, but not as strong
  • Edges splinter easily and aren't as strong as MDF
  • Does not have the screw-hold ability of other cores, however it does increase significantly with the use of particle board specific screws
  • Its use can indicate inferior construction and materials when used in the construction of furniture or cabinets
  • Tends to swell and separate, even with brief moisture contact
  • The high glue content found in the product quickly dulls the knives and blades on processing machinery and tools
  • Emits gas and formaldehyde from adhesive
6. Hardwood
  • Expands and contracts as it interacts with moisture in the air
7. Veneer Core
  • Moderate price
  • High strength to weight ratio
  • Provides dimensional stability and good strength both along and across the panel
  • Excellent bending strength and screw-hold ability
  • Lighter in weight than other core types
    CONS
  • Voids in the core and face are common
  • Not always consistent in thickness from sheet to sheet, or within the same sheet
  • The pre-veneered surface is coarser and does not accept veneer as well, resulting in excessive chipping and tearout during the machining process
  • During cutting, you will always be ripping some layers and crosscutting others, which makes cutting more difficult with a greater tendency to burn
  • Saw-cut edges are not as clean and smooth as other core types--does not take edge glue well
  • Inconsistencies in the pre-veneered surface can result in thin spots in the veneer
8. Fir Core
  • Very resilient to weather while being quite stable
  • Great screw-hold ability
  • Relative softness of the layers means that any inconsistencies in the product will even out during compression
9. Poplar Core
  • Heavier and harder than fir
  • Very stable
    CONS
  • Lacks weather resistence
  • Will not compress, making voids and knots more likely to telegraph through the surface veneer
  • Poplar that is not dried properly is more prone to delamination
10. Aspen Core
  • Similar properties to Fir Core, but less dense, resulting in a lighter sheet
  • Soft and will compress nicely giving a consistent face
11. Birch and Maple Core
  • High density
  • Both species are hard and thin, making for an extremely stable product
  • It is very unlikely for a void to be found in these core types
  • Good edge strength, making them less prone to splintering than Fir and Poplar
  • Relatively attractive cores, making them a great choice when the edges of the final product will be exposed
  • Maple has slightly more grain pattern on the surface, allowing for it to be sanded very smooth
    CONS
  • Specialty high-end product
  • Birch core has a tendency to splinter at the edge of a machined cut
  • These are the most expensive cores available
12. Fire-rated Core
  • Suitable for a variety of industrial and commercial building applications where stringent building codes and public safety requirements are a factor
13. NAUF Core
  • Recommended for applications where the presence of formaldehyde is a concern
  • Environmentally-friendly
14. Bamboo Core
  • Great for use in tropical or high humidity climates
  • Sustainable and environmentally-friendly
  • Strong
  • Can be made water-resistant
    CONS
  • More expensive than MDF
15. Medium and High Density Overlay Plywood Core 
  • Lighter than full MDF core
  • More stable surface than veneer core plywood